Project Description

When exposed to fire:
- Smoke & Flame Retardant “SFR” Dualcoat paint releases a vapour to suppress toxic gasses & prevent flame spread.
When used with TIMBERCOAT SFR Dualcoat provides durable wear, weather and wash resistant fire protection for decorative interior and exterior timber surfaces.
SFR Dualcoat applied over Timbercoat meet new Class O, Class 1 and new Fire Regs standard BS EN Class B s1 dO.
- 1 coat SFR Dualcoat over Timbercoat
- 2 coats SFR Dualcoat external over Timbercoat
- Durable, Hard but flexible decorative paint
- Matt & Eggshell finishes
- White + BS & RAL colours.
See Data Sheets and additional information below
20 & 80 square metre packs
Please Refer to TIMBERCOAT Data Sheet.
This product is designed for use with TIMBERCOAT.
Please get in touch with us to obtain the most up-to-date product details and specifications. Visit the CONTACTS page where you will find enquiry forms and telephone numbers.
1.1. Product identifier
Product name: THERMOGUARD SFR DUALCOAT (SMOKE & FLAME RETARDANT) – GENERAL
Product code: SFR -D
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of substance / mixture: An air drying water borne flame retardant coating for use on surfaces within buildings. apply by brush,roller or spray
1.3. Details of the supplier of the safety data sheet
Company name: Thermoguard UK Ltd
3, Kirkby Street
Hull
HU2 0HE
United Kingdom
Tel: 01142 768 008
Fax: 01624 825 526
Email: sales@thermoguard.co.uk
1.4. Emergency telephone number
Emergency tel: 01624 825 115 (office hours only)
2.1. Classification of the substance or mixture
Classification under CHIP: This product has no classification under CHIP.
2.2. Label elements
Label elements under CHIP:
Hazard symbols: Symbol not required.
Safety phrases: S2: Keep out of the reach of children.
S7: Keep container tightly closed.
S20/21: When using do not eat, drink or smoke.
S24/25: Avoid contact with skin and eyes.
S27/28: After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of soap and water or proprietary skin cleaner.
S29/35: Do not empty into drains; dispose of this material and its container in a safe way.
S36/37/39: Wear suitable protective clothing, gloves and eye / face protection.
S38: In case of insufficient ventilation, wear suitable respiratory equipment.
Precautionary phrases: Safety data sheet available for professional user on request.
2.3. Other hazards
Other hazards: Not applicable.
PBT: This product is not identified as a PBT substance.
3.2. Mixtures
Hazardous ingredients:
4.1. Description of first aid measures
Skin contact: Remove all contaminated clothes and footwear immediately unless stuck to skin. Wash immediately with plenty of soap and water. Do NOT use solvent or thinners
Eye contact: Bathe the eye with running water for 15 minutes. Consult a doctor.
Ingestion: Do not induce vomiting. Wash out mouth with water. If unconscious, check for breathing and apply artificial respiration if necessary. If unconscious and breathing is OK, place in the recovery position. Consult a doctor.
Inhalation: Remove to fresh air Keep the patient warm and at rest If unconscious and breathing is OK, place in the recovery position. If unconscious, check for breathing and apply artificial respiration if necessary. Consult a doctor.
4.2. Most important symptoms and effects, both acute and delayed
Skin contact: There may be mild irritation at the site of contact. repeated exposure may cause skin dryness and/or cracking
Eye contact: There may be irritation and redness.
Ingestion: No data available.
Inhalation: No data available.
Delayed / immediate effects: No data available.
4.3. Indication of any immediate medical attention and special treatment needed
Immediate / special treatment: In all cases of doubt,or when symptoms persist seek medical attention. Show this safety data sheet to the doctor in attendance.
5.1. Extinguishing media
Extinguishing media: extinguish with foam,dry powder,carbon dioxide or water fog Suitable extinguishing media for the surrounding fire should be used. Use water spray to cool containers.
5.2. Special hazards arising from the substance or mixture
Exposure hazards: In combustion emits toxic fumes.
5.3. Advice for fire-fighters
Advice for fire-fighters: Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes. Do not allow run off to enter watercourses or drains
6.1. Personal precautions, protective equipment and emergency procedures
Personal precautions: Refer to section 8 of SDS for personal protection details. Turn leaking containers leakside up to prevent the escape of liquid. Avoid breathing any vapours
6.2. Environmental precautions
Environmental precautions: Do not discharge into drains or rivers. Contain the spillage using bunding.
6.3. Methods and material for containment and cleaning up
Clean-up procedures: Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method.
6.4. Reference to other sections
Reference to other sections: Refer to section 8 of SDS.
7.1. Precautions for safe handling
Handling requirements: Ensure there is sufficient ventilation of the area. Avoid the formation or spread of mists in the air. Avoid skin and eye contact Smoking ,eating and drinking should be prohibited in mixing and application area Do not allow to enter drains or watercourses
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions: Keep container tightly closed. store between 5 and 30oC in a dry well ventilated area
Suitable packaging: Must only be kept in original packaging.
7.3. Specific end use(s)
Specific end use(s): the identified uses of this product are detailed in section 1
8.1. Control parameters
Hazardous ingredients:
8.1. DNEL/PNEC Values
DNEL / PNEC No data available.
8.2. Exposure controls
Engineering measures: Ensure all engineering measures mentioned in section 7 of SDS are in place. Ensure there is sufficient ventilation of the area.
Respiratory protection: Respiratory protection must be used if the general level exceeds the recommended occupational exposure limit
Hand protection: Protective gloves.
Eye protection: Safety glasses. Ensure eye bath is to hand.
Skin protection: Protective clothing.
Environmental: Ensure all engineering measures mentioned in section 7 of SDS are in place. Prevent from entering in public sewers or the immediate environment.
9.1. Information on basic physical and chemical properties
State: Liquid
Colour: Various
Odour: Characteristic odour
Solubility in water: Miscible
Viscosity: Viscous
Kinematic viscosity: 1-2 poise
Viscosity test method: Cone & plate @ 20 oC
Boiling point/range°C: 100
Flammability limits %: lower: not flammable
Flash point°C: not relevant
Relative density: 1.3 – 1.4
pH: 8.5 – 9.0
VOC g/l: 30 grammes/litre maximum
9.2. Other information
Other information: VOC Content: EU limit for this product is(CatA/i) is 500 g/litre
10.1. Reactivity
Reactivity: Stable under recommended transport or storage conditions. In a Fire,hazardous composition products may be produced
10.2. Chemical stability
Chemical stability: Stable under normal conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions: Hazardous reactions will not occur under normal transport or storage conditions.
Decomposition may occur on exposure to conditions or materials listed below.
10.4. Conditions to avoid
Conditions to avoid: Heat.
10.5. Incompatible materials
Materials to avoid: Strong oxidising agents. Strong acids. Strong bases.
10.6. Hazardous decomposition products
Haz. decomp. products: In combustion emits toxic fumes.
11.1. Information on toxicological effects
Hazardous ingredients:
Toxicity values: No data available.
Symptoms / routes of exposure
Skin contact: There may be mild irritation at the site of contact. repeated exposure may cause skin dryness and/or cracking
Eye contact: There may be irritation and redness.
Ingestion: No data available.
Inhalation: No data available.
Delayed / immediate effects: No data available.
12.1. Toxicity
Ecotoxicity values: No data available.
12.2. Persistence and degradability
Persistence and degradability: No data available.
12.3. Bioaccumulative potential
Bioaccumulative potential: No data available.
12.4. Mobility in soil
Mobility: Readily absorbed into soil.
12.5. Results of PBT and vPvB assessment
PBT identification: This product is not identified as a PBT substance.
12.6. Other adverse effects
Other adverse effects: No data available.
13.1. Waste treatment methods
Disposal operations: Dispose of waste and residues according to local authority requirements
Waste code number: 08 01 12
Disposal of packaging: Dispose of as normal industrial waste.
NB: The user’s attention is drawn to the possible existence of regional or national regulations regarding disposal.
14.1. UN number
UN number: not classified
14.2. UN proper shipping name
Shipping name: not classified
14.3. Transport hazard class(es)
Transport class: not classified (not+classified)
14.4. Packing group
Packing group: not classified
14.5. Environmental hazards
Environmentally hazardous: No
Marine pollutant: No
14.6. Special precautions for user
Special precautions: Always transport in upright sealed containers Ensure that persons transporting the product what to do in the event of an accident or spillage
14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Transport in bulk: not Relevant
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
15.2. Chemical Safety Assessment
Chemical safety assessment: A chemical safety assessment has not been carried out for the substance or the mixture by the supplier.
Other information
Other information: This safety data sheet is prepared in accordance with Commission Regulation (EU) No 453/2010.
* indicates text in the SDS which has changed since the last revision.
Phrases used in s.2 and 3: H400: Very toxic to aquatic life.
R50: Very toxic to aquatic organisms.
Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling or from contact with the above product.
TH/460 – SFR INTERCOAT/DUALCOAT MATT – ALL COLOURS
TH/463 – SFR INTERCOAT/DUALCOAT EGGSHELL – ALL COLOURS
Click the download button below to open our colour chart pdf.